![How to put sand on artificial grass](https://artificialgrassdesigns.com/wp-content/uploads/2023/10/How-to-put-sand-on-artificial-grass-300x200.jpg)
To put sand on artificial grass, you will need:
- Silica sand
- A leaf blower or broom
- A drop spreader (optional)
Instructions:
- Make sure that the artificial grass is clean and dry.
- If you are using a drop spreader, fill it with silica sand.
- Spread the silica sand evenly over the artificial grass. Be careful not to overfill the artificial grass, as this can cause the turf to become compacted and uncomfortable to walk on.
- Use a leaf blower or broom to brush the silica sand into the base of the artificial grass.
- Water the silica sand after it has been applied. This will help to settle the sand and prevent it from blowing away.
Here are some additional tips for putting sand on artificial grass:
- Apply the silica sand on a day when the weather is dry and calm. This will help to prevent the sand from blowing away.
- If you are using a drop spreader, set the spreader to a low setting. This will help to ensure that the silica sand is applied evenly.
- If you are brushing the silica sand into the base of the artificial grass with a leaf blower or broom, be careful not to damage the turf.
- Water the silica sand thoroughly after it has been applied. This will help to settle the sand and prevent it from shifting.
By following these tips, you can ensure that your artificial grass infill is installed properly and will last for many years to come.